Our Work / North Perth
New Steel-Line Roller Door And Jaytech Opener In One Morning
A North Perth garage got a new single Steel-Line roller door with a Jaytech RDO-1000 opener, installed in one morning visit.
North PerthRoller doorOpener
1
The Job
A homeowner in North Perth booked us to install a new single roller door on their garage, fitted with an automatic opener.
2
Fitting The Door
Our team arrived in the morning with a new Steel-Line roller door. We mounted it on brackets either side of the opening and set it into the side guides, so the curtain runs straight and sits neatly against the floor.
3
What We Did
A Jaytech RDO-1000 opener was then fitted to the end of the door and connected to the existing power point. The works included:
- Steel-Line roller door: mounted on brackets and set into the side guides.
- Jaytech RDO-1000 opener: fitted to the end of the door and connected to the existing power point.
- Manual release cord: set up so the door can still be opened by hand if the power goes out.
- Jaytech wall button: mounted beside the internal access door.
- Testing: several full open and close cycles, with the limits set.
4
The Result
The finished door gives the garage a clean, even look across the opening and opens at the press of a button.
The Jaytech warranty card was filled in and left with the homeowner, and the whole install was finished within a single morning booking.
Get Your Free Measure And Quote
Interested in a similar project? Fill out the form below and we’ll get back to you within 2 hours.




