Our Work / Marmion
New Ironstone Roller Door Installed Around Protruding Brickwork
A Marmion home’s old roller door was replaced with a new Colorbond Ironstone roller door and pelmet, mounted on a safer fixing than the old door’s makeshift fix.
MarmionRoller doorNew installation
1
The Job
A homeowner in Marmion wanted to replace their old garage roller door with a new Colorbond roller door in Ironstone, finished with a matching Ironstone pelmet.
2
What We Found
What looked like a simple swap changed once the old door came down. Part of the brickwork was protruding, which stopped the mounting bracket from sitting in its correct position.
The old door had been fitted with a timber block wedged under the shackles to get around the problem. Repeating that workaround could have affected the new door’s safety and long-term reliability, so our installer looked for a better option.
3
What We Did
Before going ahead, our installer talked the client through the issue and the options. The safest fix was to mount the new door slightly lower than the old one, giving the brackets a solid, correct fixing. The client was happy with this, as long as their car could still clear the opening comfortably. The works included:
- Bracket fixing: the new door mounted slightly lower so the brackets sit in their correct position.
- Taper roller door installation: a Standard A Series door in Colorbond Ironstone, 2100 H x 2460 W, supplied and fitted.
- Testing: the door run and checked to make sure it travels smoothly.
- Ironstone pelmet: fitted to give the finished install a clean, tidy look.
4
The Result
The client now has a new Ironstone roller door that runs smoothly, with a matching pelmet across the top. If they ever want the door raised higher, we are happy to come back, reassess the brickwork and see what can be done.
Not every installation goes to plan once the old door is removed. On this job we put safety first, explained the options clearly and only went ahead once the client was comfortable.
Get Your Free Measure And Quote
Interested in a similar project? Fill out the form below and we’ll get back to you within 2 hours.




